Special Operations Clip-On Kneepads
1.
Pull apart the hook and loop fastener strap
Pull apart the hook and loop fastener strap on the bottom edge first, then slide the gripper clip on the strap to clip the kneepad to your pants leg. Make sure the gripper clip opens to the outside. Do this for all four-strap points.
2.
Position pad for best protection of the knee
Position pad for best protection of the knee area, then gather the pant material from side of the leg and fasten the clip. Pull the hook strap over and secure for a comfortable fit. Repeat for each side and clip point of the kneepad. You may have to adjust vertical positioning several times before you find the sweet adjustment spot for wear.
2.
Position pad for best protection of the knee
Position pad for best protection of the knee area, then gather the pant material from side of the leg and fasten the clip. Pull the hook strap over and secure for a comfortable fit. Repeat for each side and clip point of the kneepad. You may have to adjust vertical positioning several times before you find the sweet adjustment spot for wear.
3.
Slide the Clip-Lock over the clip
Slide the Clip-Lock over the clip to increase clip security and prevent accidental opening. The Clip-Lock will keep the metal spring clips positively closed until you are ready to remove the pads.
4.
The further you go around the leg
The further you go around the leg to attach the clips, the tighter you can adjust them when you re-attach the hook strap back on the kneepads.
4.
The further you go around the leg
The further you go around the leg to attach the clips, the tighter you can adjust them when you re-attach the hook strap back on the kneepads.
5.
Adjusting the straps allows a comfortable fit
Pull apart the hook and loop fastener strap on the bottom edge first, then slide the gripper clip on the strap to clip the kneepad to your pants leg. Make sure the gripper clip opens to the outside. Do this for all four-strap points.
Want to wear your Kneepads with shorts?
Pull apart the hook and loop fastener strap on the bottom edge first, then slide the gripper clip on the strap to clip the kneepad to your pants leg. Make sure the gripper clip opens to the outside. Do this for all four-strap points.